Polytape Flashband TAPE Self Adhesive Flashing Tape 50MM X 10M
Rs 850.00
Out of stock
SKU
OUT11
- Strong self-adhesive flashing tape with a natural lead-look finish comprising of an aluminium foil and a bitumen rubber adhesive.
- The adhesive forms a strong waterproof seal by the simply pressing the tape into place by hand.
Polytape Flashband TAPE Self Adhesive Flashing Tape 50MM X 10M
Preparations:
- Surfaces must be sound, clean, dust free and fry.
- Use bituminous Flashband Primer to improve adhesion on porous rough, dusty surfaces in cold or damp weather.
- Porous surfaces-dampen lightly with water before applying.
- Non-porous surfaces-should be dry or only very slightly damp.
- Apply Flashband Primer with a water dampened brush.
- Fill cracks wider than 3mm, deep hollows or depressions.
Application
- Cut to the required length.
- Remove the backing. Press Flashband into place using fingertip pressure. Avoid excessive pressure.
- When laying adjacent rolls the Flashband must overlap by at least 25mm.
- Use a seam roller or rounded piece of wood to smooth the Flashband and ensure good contact is made.
| Country of Manufacture | China |
|---|
Write Your Own Review
Related Products
Check items to add to the cart or
We found other products you might like!
